One post tagged with "split monitor"

This is a tutorial on how you can split a screen in multiple screens on linux. I needed this because i got an ultrawide monitor.

For this we will use: fakexrandr.

We will begin by cloning the project: git clone https://github.com/phillipberndt/fakexrandr.git

Then we will only have to install it using :

make
make install

Note: If we get an error like: "Unable to locate package pkg-config" You will have to install pkg-config:

apt-get install pkg-config

You will also need to install :

apt-get install libxrandr-dev

You might get an error: libXrandr.c:18:37: fatal error: X11/extensions/Xinerama.h: No such file or directory

apt-get install libx11-dev libxinerama-dev

Now all you have to do is to run :

fakexrandr-manage gui

Note: To use the graphical interface you will have to install pygobject:

apt install python-gi
# or
apt install python-gi-dev

After all these steps i got the same problem as this user here but i managed to do it via CLI. Below you can see how i did it.

phillipberndt explains it very clearly in his response:

Hm, simply run fakexrandr-manage.py show-available, copy the output, and replace SPLITS="N" with SPLITS="whatever", where for whatever you subsitute your splits. From the command's output:

    It starts by one of the letters H, V or N, describing the
    kind of split. H means horizontal, V vertical and N no split. Separated by a
    space follows the pixel position of the split. Again separated by a space
    follow the two sub-configurations of the left/right or top/bottom halves. Any
    additional white-space besides a single space is optional any only serves
    better readibility. dump-config indents sub-configurations to this end.
    If SPLITS equals N, a configuration is discarded upon saving it.

That is, to have one split (step 1 in the screencast above), insert e.g. V 840 N N to split at 840px, to have the right half split further horizontally (as in step 2), insert V 840 N H 630 N N to split at 630px. This becomes more clear if you insert more whitespace:
```
V              # Split vertically
840            # at 840px
    N          # Do not split the left half further
    H          # Split the right half horizontally
    630        # At 630px
        N      # Do not split the top half further
        N      # Do not split the lower half further
```

Let's say you want to split the monitor in two, horizontally. Initially fakexrandr-manage show-available will give you the output:

NAME="HDMI-A-0" # output name
EDID=00ffffffffffff001e6d # a long hex string
WIDTH=2560
HEIGHT=1080
SPLITS="N"

Copy all that output and change only the SPLITS field to : SPLITS="V 1280 N N" . This will split your monitor horizontally in two equal screens(if your resolution is 2560) .(Those two "N N" mean that you don't want to split those two halves that resulted from the first split) Put everything into a file file_with_config, after that run fakexrandr-manage set-config < file_with_config

To see if the config is being used run: fakexrandr-manage dump-config this will output the current config that is being used.

To make it work you have to restart the desktop manager or reboot. All those things were tested on Lubuntu 17.04 and it worked.